TECH Automation @techautomation1

PR.9421 Power supply - Supply voltage 85...132 VAC or 187...264 VAC - Optional connection of backup supply - Approved for installation in I.S. / Ex zone 2 / Div. 2 - Active signal output - Optional parallel connection. For more details contact us [email protected]

PR.9410 Power control unit - Distributes supply voltage to the power rail - Optional connection of backup supply - Approved for installation in I.S. / Ex zone 2 / Div. 2 - Must be installed on power rail, PR type 9400 For more details contact us [email protected]

9203B Solenoid / alarm driver - Universal Ex driver for solenoids, acoustic alarms & LEDs - Extended self-diagnostics - 1 or 2 channels - Can be supplied separately or installed on power rail, PR 9400 - SIL 2-certified via Full Assessment contact us at [email protected]

PR.9202B Pulse isolator - Interface for NAMUR sensors and switches - Extended self-diagnostics and detection of cable fault - 1 or 2 channels - Can be supplied separately or installed on power rail, PR type 9400 - SIL 2-certified via Full Assessment Contact us at [email protected]

PR.9116B Universal converter - Input for RTD, TC, Ohm, potentiometer, mA and V - Supply for 2-wire transmitters - Active / passive mA output and relay output - Can be supplied separately or installed on power rail - SIL 2-certified via Full Assessment. contact us [email protected]

PR.9113B Temperature / mA converter - Input for RTD, TC and mA - Active / passive mA output via the same two terminals 1 or 2 channels - Can be supplied separately or installed on power rail, PR type 9400 - SIL 2-certified via Full Assessment Contact us at [email protected]

9107B HART transparent driver - 24 VDC supply via power rail or connectors - Fast response time - High active output load 725 Ohm / 20 mA - Output line fault detection via status relay - SIL2 certified via Full Assessment according to IEC 61508 Contact us at [email protected]

PR.9106B HART transparent repeater - 24 VDC supply via power rail or connectors - Active and passive mA input - Active or passive output via the same two terminals - Splitter function - 1 in and 2 out - SIL3 Full Assessment and certified acc. to IEC61508 Contact us [email protected]

PR.7501 Field mounted HART temperature transmitter - RTD, TC, Ohm, and bipolar mV input and analog output - High definition local operator interface (LOI) with 3 optical buttons - Selectable red or white backlight For more details contact us at [email protected]

PR.5909 Loop Link communications interface - USB connection - For PReset version 5.0 or higher - Used for the configuration of these devices: 511x, 522x, 533x,571x,633x,643x . For more details contact us at [email protected]

PR.5715 Programmable LED indicator - 4-digit 14-segment LED display - Input for mA, V, Ohm, RTD, TC and potentiometer - 4 relays and analog output - Universal supply - Programmable via front keys and PC For more details contact us at [email protected]

PR.5714 Programmable LED indicator - 4-digit 14-segment LED display - Input for mA, V, Ohm, RTD, TC and potentiometer - 2 relays and analog output - Universal supply - Front key programmable. For more details contact us at [email protected]

PR.5334A 2-wire programmable transmitter - TC input - High measurement accuracy - Galvanic isolation - Programmable sensor error value - For DIN form B sensor head mounting For more details contact us at [email protected]

PR.5333D 2-wire programmable transmitter - RTD or Ohm input - High measurement accuracy - 3-wire connection - Programmable sensor error value - For DIN form B sensor head mounting For more details contact us at [email protected]

PR.5331D 2-wire programmable transmitter - RTD, TC, Ohm, or mV input - Extremely high measurement accuracy - 1.5 kVAC galvanic isolation - Programmable sensor error value - For DIN form B sensor head mounting For more details contact us at [email protected]

PR.5331A 2-wire programmable transmitter - RTD, TC, Ohm, or mV input - Extremely high measurement accuracy - 1.5 kVAC galvanic isolation - Programmable sensor error value - For DIN form B sensor head mounting. For more details contact us at [email protected]

5225A Programmable f/I-f/f converter - Pulse conditioning - Frequency generator - Concurrent f/I and f/f function - Analog current and voltage output - PNP / NPN output, optional relays - Programmable by PC and Loop Link. For more details [email protected]

PR.5202B Pulse isolator - 2 channels - 2 or 4 outputs - Dual output - 5-port 3.75 kVAC galvanic isolation - Cable error detection - Universal supply by AC or DC For more details contact us at [email protected]

PR.5116B Programmable transmitter - Input for RTD, TC, mV, Ohm, potentiometer, mA and V - 2-wire supply > 16.5 V to Ex zone 0 - Bipolar voltage input - Output for current, voltage and 2 relays - Universal supply by AC or DC For more details contact us at [email protected]

PR.5114A Programmable transmitter - Input for RTD, TC, mV, linear resistance, mA, and V - 3-port 3.75 kVAC galvanic isolation - Current and voltage output - Universal voltage supply - 1- and 2-channel versions - Loop supply > 17.1 V For more details contact us at [email protected]